Go Bottom3 point and pto
 | labatt1
Join Date: Jan 2005 Posts: 7 Clarendon, NY 
|
2005-02-13 106012
Going to jd dealer this week to place order for jd2210. Just wondering what limitations there are for cat1-3pt and pto for implements??
Reply to |
Quote Reply |
Add Photo3 point and pto
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2005-02-13 106021
The PTO is the standard 540 RPM. The hitch is considered a 0-1 which means the cat 0 dimensions and cat 1 pins. Problems with full cat 1 is limited full up lift although not much of a problem with many attachemnts. ....
Reply to |
Quote Reply |
Add Photo3 point and pto
 | JDFANATIC
Join Date: Jul 2004 Posts: 119 Southington, CT
Pics
|
2005-02-13 106024
labatt1,
The only implements I'm aware you have limitations on are: post hole digger (although members use them with) and big brush hogs with the problems their weights bring.
Cheers
JDFANATIC ....
Reply to |
Quote Reply |
Add Photo3 point and pto
 | beagle
Join Date: Jan 2004 Posts: 1333 Michigan 
Pics
|
2005-02-15 106174
You can also have problems with some ground engaging equipment, box blades and grader blades. A 17" moldboard height will probably be a problem since the limited lift height will keep you from being able to comfortably lift the blade off the ground. There are sveral manufacturers that now offer 12" moldboards for the subcompact models.
I used to have a sub-compact, and had to be very careful with the equipment i bought for it. I even had to cut three inches out of a middle-buster to be able to lift it high enough to clear the ground. KingKutter now offers a completew line of XB equipment, built to fit the sub-compact limited cat-1 hitch. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This